Posts

Chosen Solution I have a quiet partner dishwasher. The keypad works EXCEPT for the start and cancel buttons. I tried unplugging it and also tried resetting using the buttons. It resets and starts on its own, but you can not cancel when running and after it shuts off from the reset, the start button still will not work. Any suggestions? Hi, What is the model number of the dishwasher? Check that the pins on the wire harness connector and the harness cable on the control panel aren’t corroded....

Chosen Solution Hi, I spilled some coffee (no sugar in it) on my keyboard… initially it worked just fine, the next day the whole keyboard was off… the trackpad lost a bit of its clicking capability but everything else is 100%, at the moment I’m using Bluetooth keyboard and mouse, would be great to have it like before the accident of possible, any suggestions? This is not good ;-{ You do need a new keyboard but you can’t replace it in this series, you need to replace the entire uppercase as its riveted in and very hard to replace on its own....

Chosen Solution When experimenting with my OLED Switch I accidentally scuffed the paint off of the sensor rails and am interested in swapping them out with brand new ones. I’ve only been able to find replacement rails for the original though, which are very slightly different - curious if there’s a place I could buy OLED rails, / when I could expect them to show up on this site? Appreciate the help!...

Chosen Solution Yes does anyone have an approximate heat range for the glue on front bezel/digitizer to pop it and not damage internals or a safe starting point? The degetizer glue its take from 80c to 120c to soften and easly remove ur screen

Chosen Solution Device information regarding the internals. Does this device have an internal speaker The Sonos Connect unit can do many things when paired with other devices from the Sonos line of electronics like the Bridge or Boost and speakers. The Connect device itself however does not have a speaker internal to the unit, it must be used with an amp and external speakers in order to get the desired music listening pleasure....

Chosen Solution So some time ago my brother dropped his iPhone 5C. The screen stopped working, though notifications would buzz, and the vibrator would activate when flipping the mute switch, so the phone was still on, but it heated up a bit, so he turned it off (holding power button, guessed where to swipe). He bought a replacement phone, but I just got a kit with a pentalobe driver, so I thought I’d have a gander inside, and I couldn’t see anything wrong with it, beyond it lacking a contact cap under the mainboard....

Chosen Solution Hi, I have motorayla g7 power and I have a screen protector but have dropped it many times and it has blackish browning line at bottom or when I turn it and sometimes has blackish in corners what can I do I can’t afford a phone right now please help You have 2 options, change the screen or live with it for a while. I have found the screen for 32 dollars from fixez....

Chosen Solution I just bought a new motherboard because i was having some major issues with my last one. It unfortunately didn’t come with the driver disk. But i was able to get it all online and its updated. But now im having this issue where i get the error “Ethernet doesnt have a valid IP configuration” At first it woulnt’t even show it was plugged in till i changed “auto disable gigabit” to “relink, battery or ac” and disabled both “Energy efficient Ethernet” and “green Ethernet” Iv tried the following to fix the problem: Disabled/enabled Unchecked “turn on fast start up” Entered in IP and DNS myself Uninstalled and reinstalled driver Restarted the router disabled IPv6 unplugged pc and hit power button for 30 seconds reset windows 10 with keep files (these worked for about ad hour after then went right back) Command prompts netsh winsock resetnetsh int ip resetipconfig /releaseipconfig /flushdnsipconfig /renew I tried to stop/restart DHCP client but i get an error (Error 5: Access is denied) and i run is as admin There are times some of these will work but then it will go right back to no ip config....

Chosen Solution Hello ifixit folk, I was wondering what the best solution to getting film to develop would be? They are all turning out blank >_<. Thanks lads! -British Joey Hello Joseph from the UK, If the film is developing blank, we recommend that you check to make sure the shutter is functioning properly and the light/five-mode dial is set to proper lighting. If the problem consists then replace the batteries....

Chosen Solution My galaleo tablet is stuck on fast boot mode with a blank screen. I tried the volume buttons with the power button and it’s still stuck in fast boot mode Sherry Kirtland lets try to get your tablet to reset. Follow these instructions.Press and hold the volume up and power buttons. At the RCA logo screen, let go of the volume up button and you should next see an android image....

Chosen Solution Where can I get replament strummer for Hofner Bass? Take a look at; http://www.guitarherorepair.com/ They seem to have quite a selection of parts for Guitar Hero related products and seem to ship worldwide.

Chosen Solution Hi. I just replaced my HD with a new SSD. When I boot it up, it seems like it goes into Internet Recovery. I can get to the spinning globe and it does something for 15 mins. while the progress bar fills up, but then gets stuck on the Apple logo and won’t do anything after that. Any ideas as to what might cause this? You could leverage your HDD using the [linked product missing or disabled: IF107-108-1] then using a USB keyboard use the Option (⌥) key to get to the Startup Manager to select the HDD to boot from....

Chosen Solution On this computer can you improve the graphics at all, or am I stuck with the one already in it? The simplest thing you can do is to replace the motherboard with a newer one from the same N551 series model. Asus N551VW can generally be considered a good option for such an upgrade: motherboard is exactly of the same shape (consider replacing the cooling system)all I / O ports and connectors are located in the same places (keep your old chassis)it is equipped with a newer (6th gen) Intel processor (VS the currently installed 4th gen)GTX 960M graphics has a higher memory bandwith (VS the currently installed GTX 845M)total costs make not more than £300 (new MB with i7-6700HQ from China on eBay), and can be decreased by selling the old MB, for example So, there are possibilities for improvements, but it all depends on how far you want to go with this....

Chosen Solution Can I retrieve all my pictures after my computer was wipe out Yes you can there is softwares out there that you need to pay in order to deeply scan sectors for data recovery. Like Recuva, EASEUS, StellarPhoenix Some let you try for free to see if you can find your data before you buy the full version.

Chosen Solution Can you only replace one letter from the keyboard? the letter T and the downward arrow do not work on my MacBook. Is there any chance I could replace just them? Short Answer: Not easily,If you want to replace the 2 keys you need to replace the keyboard and have to replace the whole top case… Or if it’s the mechanism or key You can pick some up. What year is the MacBook?...

Chosen Solution Cant load OS from SSD, bootable usb, etc. Getting white crossed circle. Got this after trying to do testing… You’ll need to re-install your MacOS via internet recovery, restart your system and press and hold Command (⌘) and R keys. Reference: Mac startup key combinations But you have a bad HD SATA cable! follow this guide MacBook Pro 13" Unibody Mid 2012 Hard Drive Cable Replacement and here’s the needed part MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable....

Chosen Solution I have a mac mini as listed A1103 it belongs to my girl theres a cd inside the unit and it doesnt come out and seems to be causing some kind of error because the unit doesnt post. Is the cd inside causing the problem, in any case this is the issue how do i take the cd out? Or do i have to replace the optical drive? Thanks in advance....

Chosen Solution I have an ide, but i will need some help…. i have the first ipad mini, and i think of putting the in my car, will 3d print a nice stand for it, but i will have som issues white the power and headphone, that need to go on the long side of the ipad. is it possible, i havet open a ipad mini, so don’t know if i can just move them and make a new hole in the chassi do u have any good information, pleas writ some lines down:) Thanks...

Chosen Solution Help me to fix loose plans for microphone kimberlykarren from your decription it sounds like you are talking about the Mic Plug 4 pin for Cobra radios (#17 in the image). That part number is KEJ-163 and the part on the radio is the Mic socket 4Pin PLT-164-r part number KEJ-032-1 (#28 in the image). Tough part will be to find it. Contact cobra on here to see if they can help you....

Chosen Solution no power or lights just failed to start seems to have 19.56v on mother board, nothing getting hot Try to remove the battery and hold power button for 10-15 seconds. Put back in the battery and try turning it on again. If that still doesn’t work verify the charger is charging and matches volts that the laptop requires. If it still doesn’t work or show any signs of activity it would most likely be shot....