Chosen Solution These days, my Samsung android phone micro SD card just kept asking to format before any access. However, considering about the safety of some messages, contacts and photos stored inside this SD card, I did not format it and try it on my PC, but, got the same not formatted error warning problem. So, I did format it and windows say it was not able to compete format it?...
Chosen Solution Whenever I plug in my phone I have a weird error that is occurring. It says unauthorized charge error. Is this something I can fix by replacing the battery or do I need a new charger or phone??? If this error occurs the first thing you should try doing is making sure you are using the right charger. Make sure the charger that actually comes with the device is being used and do not try to use a universal charger....
Chosen Solution color stopped 1st then black Hi Frank, yes, it is the print head dispensers which are clogged. It is a very simple task to clean them. Remove the cartridges from the print head. Once you have done that you will notice there is a grey arm on the right hand side of the print head mechanism box. Lift that up and voila you should be able to now lift out the black print head chamber where the cartridges clip into....
Chosen Solution My ASUS A6JC laptop has a flat CMOS battery. The symptom is every startup it asks to reload the default values. When started the time is 1200 May 2006. Other than that, no problem. It is an annoyance really, this has been a pretty good laptop, have had to replace screen, $100 from eBay and a new battery. I have removed every cover and can’t seem to find the battery....
Chosen Solution After replacing a dead battery, macbook pro won’t turn on; it was working a few weeks prior to replacement, but the previous battery gave up after being off the charger for 4 days (for the first time in a few years). Followed everything I could find including looking for fan movement with battery disconnected when plugging in magsafe; nothing. Opened it up again, and noticed a damaged component. I THINK it’s an inductor, but not sure....
Chosen Solution A few days ago my Galaxy S7 did an update around 3am, and now I’m experiencing constant shut-offs, lock-ups, pixelated screen and it goes through a reboot loop(Galaxy start screen to Verizon screen and back). I’ve cleared the cache numerous times, ran it in Safe Mode, and did a Factory Reset twice. The symptoms are still the same? I even pulled the SIM Card to see if it might be a Verizon issue…still shuts down....
Chosen Solution I accidentally used a 24 volt charger in my xperia z3 is it blown up .. it went dead Anthony Clarke most likely yes. It is possible that your board has multiple destroyed components etc. It is no longer possible to get any schematics for the Sony Xperia phones since Sony does no longer support those. You can start with a new battery and re-evaluate. If that does not work you will have to disassemble your phone and take a look for any obvious damaged components....
Chosen Solution Hi there, I was wondering if anyone would have the answer to my really strange situation. Basically, every time I want to turn my MacBook on, I either have to disconnect the battery and then plug it back in and then it will boot up as normal, or I have to reset the SMC every single time and then it will turn on as normal. When it turns on, the built-in display works for less than a minute and then randomly turns off and then will not turn on again until the machine is shut down and then powered on again....
Chosen Solution Hey I’ve just picked up a 2.5” 500gb SATA hard drive to replacement my faulty one in the Xbox one s. Installation and replacement seems relatively easy; I wanted to query whether before installing the new drive if anything needs done to it? I’ve seen conflicting statements people talking about reformatting etc. One method I seen was someone recommended installing and using the offline update system through safe boot mode to format, Being on Mac this seems the easiest option....
Chosen Solution I recently replaced the battery in my iPhone 7. Everything worked fine, and as I was following the battery calibration instructions and had it charging, the screen would no longer turn on. The haptic feedback on the home button works, so I know it is on. I’ve tried a new battery, cleaning all the screen contacts, reseating them, etc. The only thing I can think of is that the flex cable of the screen somehow got damaged....
Chosen Solution Do you sell backpanel and kickstand for samsung galaxy view 18.4? Marichu Cortez does not look like iFixit carries any parts for this model. Best thing to do would be to ask the sales staff directly by contacting them on here. Welcome Marichu Cortez can yuo check this link below https://rounded.com/samsung-galaxy-view-… Good luck
Chosen Solution The top screen is perfectly normal but the touch screen’s colors are inverted. Rarely they turn back to normal but soon become inverted again. Have you taken apart or damaged your DS? If so, you may have a torn ribbon cable.
Chosen Solution Hello everyone, [TLDR: new battery, new MagSafe board, SMC and PRAM reset but battery not charging] A few months ago, my venerable MacBook Pro’s battery finally gave up. Its capacity had been decreasing but it suddenly dropped to 0, meaning that if I disconnected the cable, the system would immediately shut down. However, I was still able to use it with the MagSafe connected. However, a few weeks ago, the MacBook began to shut down randomly, even after less than one minute of activity, without any load....
Chosen Solution Hi everyone. I recently bought myself a 1983 Mercedes 300D, and I’m having issues with the car being down on power. I have replaced the fuel filters and run a couple cans of Diesel Purge through the IP. When I first got the car, it seemed like it may have not been boosting properly, but now that I have installed a boost gauge, I am seeing 10-11 PSI, which I believe is normal for this car....
Chosen Solution Fans start then stop for not even 1 second, repeatingly, when powered by cable, no pushing of power button needed. when just battery, power button does nothing. tryed shift+control +alt+power button, fans stop, then on release the led goes orange to green and fans start repeating the cycle again and again. At this point it really sounds like your battery is bad. Lets see if we can by pass the battery....
Chosen Solution I have a D3100, My flash pops up but does not fire, and when I put on a external flash it does not fire. I didn’t see a spring on my pop up flash mechanism. I have a D3100, My flash pops up but does not fire, and when I put on a external flash it does not fire. I didn’t see a spring on my pop up flash mechanism
Chosen Solution Could someone explain what all the brown flex’s / tape / shields are on the middle frame of the phone are used for , what are they ? Could someone explain what each one is .? Does it matter they got damaged when removing the back .? Have it marked in picture Update (03/05/2021) I have attached a picture on the one that got damaged .? It’s not the NFC one...
Chosen Solution Hi GeoKing 3 Max LED notifications not working. How do I enable it? Thx Hello mwbro1! It looks like your phone should be running Android 7 - if the problem is not with the actual light, you should be able to access your LED light settings from either the Display tab under Settings or the Smart Assistant tab under Settings. Mine reads “LED Notifications”. Hope that helps! Hi my name is Jesus, my geoking 3 max never charge the battery, so I stop using ,it try other chargers but , do the same thing ,so after that, I bought another new cell phone so I call the company from where I bought this phone but never answer my callswhat can I do to fix this phonemy email is Jliza58@gmail....
Chosen Solution Hey i just bought a phone of my freind and its works fine when my hands are dry but when they get a little sweaty the ghost touching starts. Its works perfectly when i wrap a tissue around my finger and tap it. Will a screen protecxtor solve this issue? Sounds like the screen is a poor quality and has probably been changed at some time. I would suggest to have the screen replaced this will solve you issue....
Chosen Solution Hello everyone, I have an AIO ASUS ET2230INT and when buying an SSD and arranging to change it I find that it does not have any screws, nor see how to open it. I leave two images of my computer. http://www.asus.com/media/global/product… http://www.asus.com/websites/global/prod… There are models similar to this that in the corners have screws to be able to open, but this one does not have. I found these 3 screws, but removing them I still can not find a way to open it....
