Chosen Solution Why does the front camera of my iPhone 4S is not working after changing LCD? check that you have all the connectors seeded correctly or look in the camera window and make sure the camera is not off centre
Chosen Solution Hi where is the fuel level sender unit on Volvo C30 ankmrlehuquet the fuel level sensor or Fuel Tank Sender unit is in your fuel tank. Update (03/31/2019) mrlehuquet what is it exactly that you are looking for? What engine model is this? Here is the wiring diagram and check for sensor 7/130 and 7/143 on the bottom of the page.
Chosen Solution I have a samsung galaxy A51 it will charge from my computer but not on a wall is there a usb tab in the phone that might have switch to only charge usb how can i fix this issue Hi @hjubela, Have you tried a different compatible wall charger, you didn’t say? The problem may be with the wall charger since the phone charges OK from a computer. This is assuming that you’re using the same charging cable to connect between the phone and the computer and between the phone and the wall charger....
Chosen Solution My Epson Printer/Scanner xp324 prints ok. When I try to scan using the control panel The error message states “communication error. Check the connection” which can’t be right, as I can print OK. I have re-installed printer + software but still no joy. Any ideas, please? Hi @debbru , I don’t know Mac at all so I’m probably not much help. The only things that I can suggest is to check that you have the Epson Event Manager software installed....
Chosen Solution I have been trying to set up Siri for a week but it does not respond to my voice when I say “Hey Siri” but the phone picks up my voice when giving commands after pressing the home button. Any advice on how resolve this issue? There’s 4 microphones located in the 8 plus. The two at the bottom are part of the charge port assembly. There’s another one that is a part of the front facing camera assembly at the top and the fourth one is at the back by the rear camera....
Chosen Solution I put a child lock password n know I don’t remember it. I am turning off the tablet by then holding the power off option then is asks about safe mode I say yes . It then says shutting down but when it restarts it is still locked Erase data using the Settings menu To perform a factory data reset using the Settings menu, follow these steps: Before you reset your Android One, see options for backing up your data....
Chosen Solution I have a Movado Connect 2.0 smart watch that won’t charge. I replaced the base, so that’s not the issue. I’d like to send it somewhere to get it fixed. Hi @jeredm Ifixit does not do repairs. It mainly deals in supplying parts for mobile phones, computers and tablet etc mainly Apple/Mac products but the list is always increasing. Click on the Store link at the top of the page to see what is available....
Chosen Solution Hi, I just change my logicboard for my MacBook Pro and when plugin power. Screen blank and keep beeping very softly every seconds. I have removed RAM and try single RAM on both slot still the same. Appreciate your help. Thanks. Is the system up and running? Or stuck in a boot loop condition? Review this If your Mac beeps during startup Please clarify what the beep code is, you may have either have a bad logic board or RAM....
Chosen Solution Hi, I tried to change my phone screen because mine was cracked. I plugged in a screen from a different iPhone 6 plus. Everything worked. Then I tried going back to the old screen. Nothing popped up. I thought, this is weird. Then I tried to plug in the new screen. Nothing popped up. So I plug the cracked phone into my 2015 Macbook Pro, iTunes recognized it. So I plugged both the screens into the other iPhone 6 plus, everything worked fine....
Chosen Solution CD seen as blank while it is not Loading a CD takes a few steps. First the laser fires to see whether or not a disc is present. If that passes, then the system will attempt to read the Table of Contents (TOC) from the disc. It sounds like this is not happening with your system. If you can hear the disc spin up, then I would say that the TOC is 0not being read....
Chosen Solution Hi everyone, I recently attempted to replace the screen of my old Ipad 2. Unfortunately I managed to break one side of the cellular antenna cable. It didn’t matter to me at first because I almost never use cellular connection with my Ipad anyway. Everything else was working normally, except occasional system message “can not use mobile data, please restore” (or something to that effect), which I ignore. However when I subsequently tried to upgrade to IOS 9....
Chosen Solution I cracked my screen and it seemed to be working fine then later that night i had it charging but it wasn’t exactly charging. It should the power thing but my batter percentage want going up, it was just staying or going down as time flew by. Is it my charger port or my battery or do I simply need a new charger. Always try an original Apple charger to rule that out but most likely not the case....
Chosen Solution The charging cable is very loose in the phone charging port. Can I get parts to replace the port on my Droid Turbo Power/ You can take it to a technician for repair. Lose charging socket is a common thing and very easy and cheap to fix. Do that before occupying yourself with installing new parts. You may not have to.
Chosen Solution I bought an iPhone 11 Pro Max about 2 months ago and recently noticed that the compass isn’t working so I can’t use directions on maps. Compass calibration is turned on, tried restarting my phone and the compass will work a day or two after it freezes until I restart my phone again. Things like location and elevation are working. And I don’t have a magnetic case. Also tried reseting the iPhone with a backup....
Chosen Solution Hi guys and girls..:) so, about a month ago, i decided to build my self a New pc. I’ve put it together myself as I’ve done that multiple times, so it’s no issue - and the PC’s running fine most of the time.. However, when i play games (AC3, MW, CS GO and the likes of that) my PC freezes to the point where i have to force reboot it....
Chosen Solution My computer will shut off after a little while of usage. And i noticed that it only does it when i am on the computer and in the process of opening a file or loading a website, the usual activities one would use a computer in the first place! I just vaccumed out the inside of any dust bunnies, and left the panel open to get more air, and once again it did it again while i was opening a web site....
Chosen Solution I used to play with games via wired USB with my controller but one day it didnt started, the light didnt glow on the controller , I tried to turn it on through the batteries but didnt worked . please help i dnt have any service centre around me (in my city). I would check to see if the charge port (micro usb) on the controller looks damaged in any way....
Chosen Solution I am not sure if it works, but when I put LCD screen back into connecter, touch digitizer no longer functioned and tried to replug it in multiple times, but unsuccessful. Also phone is IPhone 6s Plus 5.5 inch. But couple days later after calming down, I was concerned that I hope I did not damage the touch digitizer connecter. Here is image for zoom up, let me know if you can spot any damage into connecter or it its ok....
Chosen Solution Ok so we sold a used iPhoen 6 Plus to a customer, they brought it back after a few weeks with the device not powering on at all. Did some diagnostics and found that it came on with a new screen. So we replaced it. A few weeks go by and it’s back with the same issue, it will turn on with a new screen, the other screen we took off works fine on another iPhone 6 Plus but not this one....
Chosen Solution My speakers aren’t working (crackling sounds), but I don’t want to replace them unless I have to. Is there another way to fix the problem? Speakers crackling could be an issue that can be fixed through a simple troubleshoot. Type “find and fix audio” into your computer’s search bar. Select “find and fix audio playback problems”. Find your speakers on the device list and click “Next”. If that doesn’t work then you can try disabling your audio enhancements by clicking on the little speaker icon in the bottom right hand corner on your taskbar and selecting “mixer”, then select “speakers” and click “disable audio enhancements”....
