Chosen Solution Do you have information about YP-U5 Samsung mp3 Heads up- here are some links- https://www.samsung.com/uk/support/model… https://www.samsung.com/uk/support/model… Good luck!
Chosen Solution My daughter dropped her A2179 MacBook Air and her screen now has lines that have gotten progressively worse but it appears the progression as stopped as you see them now in this video: https://youtube.com/shorts/FiWDU1wiCb4?f… There are no visible cracks in the screen. Is it likely that the screen is my only problem and a replacement will fix the issue? Hi Brent, Yeah, that’s definitely a cracked LCD panel. I would have a high degree of confidence that replacing the screen will fix it....
Chosen Solution I was told I need the hard drive heat sensor and also told I don’t. After questions get an initial answer there seems to be zero follow back up if you have further questions, thus having to post this. If I install MOJAVE OS or newer I was told with a new hard drive I don’t need the sensor, is that correct? I have a new western digital built 14, October 2021 I am going to install....
Chosen Solution My friend ask me the favor to fix the cushion on his monster Dna. I wondering if there’s a different process compared to Beat solo 2 like that has a sticky back or do i have to unscrew screws? I don’t know and I need a answer. Very easy I got some off ebay not really expensive and they worked great I’m a dna fan but to be honest there cushion suk balls in have three pairs and they all do the same $@$* hut any way first you remove the old ones completely there is a little strip that is on the edge that has to be removed once u do that the replacement ones have the same ship on it slide it in the gap from were u took the old one out once u get a little in there hold it tightly and slowly pull on the remaining strip little by little u will see it go in almost by it self as u pull the cushion out to get it in the Grove were the old one came out from hope this helps...
Chosen Solution Samsung GT-E1200I The two sites I found want me to install software, but I’m not willing to do that. It isn’t necessary. @nikmail12 anytime any of those sites want you to install software, don’t do it. It’s most commonly malware (or worse) and they won’t have the manual that you are looking for anyway. Service manuals are tough to come by due to it’s copyrights etc. Best places are the developer forums....
Chosen Solution Per installment guide, looks like the adhesive gets destroyed during removal. I see there is a separate “iPhone 6s Lightning Connector Cable Adhesive” but it is out of stock. Would hope/expect the “iPhone 6s Lightning Connector and Headphone Jack” part would include the adhesive but don’t see it on the picture of the part and its not included in the fix kit. Depending on where you order it from, it should come with adhesive reinstalled, at least that’s the case from the parts suppliers I use like Mobile Sentrix, Mobile Defenders, and Injured Gadgets....
Chosen Solution Dropped Mac air 13 inch (1466) keyboard and trackpad not responding power button not responding Cannot reset smc or pram other than that seems to be running fine fan seems to be running overtime though charger still working Update (02/14/2019) Drilled open stripped screw. Detached and reattached trackpad cable. Good as new never turn your computer over unless battery is screwed in :) Sounds like you really need to reset NVRAM/SMC....
Chosen Solution I dropped my phone on the floor and now the screen has a black area which is lit up. The phone still works, however I am unable to log in due to needing to press the password manually after a shut down and the black and white area prevents me from interacting with the screen at all. Will getting a new screen solve this issue? And if so, where can I get one?...
Chosen Solution Hi folks, I’ve been repairing iPhones for a number of years. This week I did 2 iPhone 8 plus LCD’s for the first time. After swapping over all the parts and screws and powering up the phone, the earpiece doesnt work when I ring someone. Loudspeaker works, so does everything else. I made sure that the black double sided tape was lifted and nearly put back on the contacts on underside of the flex cable....
Chosen Solution When I try to start my PS4, the hard drive makes repeated clicking noises, as if it keeps trying to read it and it physically cannot. I already removed the plastic cover and have taken out and reinserted the hard drive, and it changed nothing. I’m assuming the problem is physical, but I really know very little about such matters. Is this something I can fix on my own or will I need to take it into a shop?...
Chosen Solution My ps3 fan speed very fast and loud when am playing a game so what could be wrong? I don’t think anything is wrong here. The fans are supposed to speed up when under load to regulate the temperature inside. However, it might be worth having the console do a self-clean, which is a good way to clean it without risking opening it up. To do this, unplug the power from the system....
Chosen Solution I have a JBL Flip 4 speaker with a dead battery. I bought a replacement battery from you, but I cannot get the old battery out. Pulling by the wires resulted in the wires breaking off. Now the battery is just stuffed in there with no way to grip it. Do you have ideas about how to get it out? Is it dangerous or toxic to rip it out in pieces with needle nose pliers?...
Chosen Solution I have a gateway ms2273 that I need some old files from and can’t remember the password. I try to reset in safe mode but when I get to selecting “safe mode with command prompt” my screen loads files and says wait, then goes to black with no further options followed by the windows login screen…again, yet in safe mode. Any ideas how to get around this? Hi @juuyaak, From another PC, download Hiren HirenBootCD, http://www....
Chosen Solution how does one change the bulb for the left front turn signal? This video link shows you how to change a burnt out front turn signal bulb on your 2013 Toyota 4Runner. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn’t blink at all / stays stuck when engaged, this is your 4Runner’s way of telling you that a turn signal bulb is burnt out....
Chosen Solution MY GE profile refrigerator not cooling . Motor running, lights are ON, Cleaned the condenser coils, condenser fan running, Changed the food area thermostat, Changed the evaporator cover, From yesterday it is running, temperature showing 72 on freezer side and 74 on other side, What may be the next point of reason not cooling Thanks Matt Hi @varughese , What is the model number of the refrigerator? Given that both compartments are warm and the compressor is running the problem may be a faulty compressor or a lack of refrigerant in the sealed system due to a leak Is the compressor motor too hot to touch?...
Chosen Solution replace screen. now I can’t slide to open. What component controls this action? Is it one of the plug ins? One of the plug ins had a metallic tape connecting it to the old face. It ended up sticking to itself. Does that tape contacting the plate serve any purpose? Hi Joe, is it not possible to reverse the digitizer plug which is the one that controls the touch....
Chosen Solution My question is specific to the UP3 series pumps and whether or not they can be PWM output controlled to vary output flow. The pressure is low (less than 15psi). Is there a recommend maximum PWM frequency? I was thinking 30Hz or less for this type of device. Also, I noticed on the 12VDC tag it says EMI filter inside..do not use with PWM, but the 24VDC version does not have this same warning....
Chosen Solution The charging port is falling apart can it be rebuilt? rjslogger sorry but ifixit does not do repairs. here you are empowered to do your own repairs by either using the great guides or getting answers to help you may need. The port is soldered to the board. You will have to pull the logic board, find a replacement connector and resolder it to replace it. iPod Nano 7th Generation Logic Board Assembly Replacement
Chosen Solution I cannot get SIM card out of my zte z982:how do I remove cover Hi, Here’s a video that shows how to remove the back cover from the phone in case you can’t eject the SIM tray in the normal way.
Chosen Solution Dell model no pp39L CD has got stuck in machine and won’t eject, now machine will not turn off keeps saying it’s logging off but does nothing, can only turn it of at the start button. Any ideas? Is the CD drive the kind that you just push insert a cd or is it the kind where you press a button and the tray comes out for you to place the CD into?...
