Chosen Solution I spilled some water on my MacBook Pro Early 2011 keyboard. Water went all the way down to the logic board. I disassembled everything and dried it out. Then cleaned the logic board with some Isopropyl alcohol. I then reassembled it and found that it starts booting OSX but then get’s stuck at about 75%. Once I was able to get to the login screen, but then it froze....
Chosen Solution I previously had my battery replaced. And then my screen cracked, so I decided to repair it myself. When I removed the back cover, the previous tech had damaged then put adhesive on the the small printed circuit decalsjust under the cover in the corners. Now they are torn. I completed the repair and placed them back as best I could and everything still seems to work, but what are these for?...
Chosen Solution I set my date and time accordingly in my camera and after some time, eg half a day - a day, I notice that it’s reseted back to 2012. This keeps happening … Does anyone else have this problem ? Does it have a small battery for the RTC ? Can this be changed easily ? Change the battery. Sounds like it is losing power and resetting to the default date....
Chosen Solution I finished middle school, and they let me keep my Chromebook. It is a Dell Chromebook 3100. That’s all it says, and I can’t do anything because it is enterprise locked, and I don’t have my school account anymore. I have followed tons of tutorials and guides but none of them worked. I don’t know what to do, or if there is anything I can do. Please Help!...
Chosen Solution Anybody able to help? I’ve got a John Deere ride on mower (x155r) recently put it up on axle stands to have inner tubes fitted in tyres, after a couple of weeks fitted said wheels lowered it to deck, started engine, great, no drive to wheels. If I engage or disengage parking brake still no drive. Have tried neutral override push bar, no difference. Am able to move manually but does not engage drive....
Chosen Solution The Mac is just idling on the desktop with TG pro open and the cpu package is 69 degrees, however the heat sink is cool to the touch MacBook fan is stuck on full. It was suggested I replace the actual fan, I have done so and it has not fixed the problem. Here is what asd says: Also this is what’s macsfancontrol has to say on the issue...
Chosen Solution Somehow I’ve managed to mangle the charging port on my Fitbit Ionic, is it possible to open it up and replace the charging port? I am aware that soldering will be required. Image of damage attached. Well,yes you can open it up. It will be difficult if you’ve never soldered before. Something of that size(micro usb) has 5 pins typically. It is hard to solder pins so small without a microscope,but yes it is possible....
Chosen Solution Hello and thanks for the teardown. Do you have any further information about those two pins on the backside of the device? Hey Tim! OnePlus claims that those two pins “…let the system recognize the StyleSwap and change the theme on H2OS.”. In other words, H2OS will change the system theme to match the StyleSwap cover that you have attached. There was a theory that the pins were used as some sort of proprietary mobile payment system in countries such as China and Korea… not 100% sure though...
Chosen Solution I have a LG front loader more than 5 years old. Recently it started making loud banging noise at the beginning and end of spin cycle. I also heard sounds randomly at times, which i think is when load is not too balanced. I tested it at low spin (400) after adding some clothes and there was some really loud sound. So loud that i thought it will get damaged and stopped it immediately....
Chosen Solution While I am playing Mobile Legends, I experience ghost touch in which I the touch point is bit far from from where I am touching. I played different MOBA games and the same issue I experience. Any help is accepted. Umm I also play mobile Legends but you can go and you will see a gamemode you recently played ,the chests, events and the shop then you will see at the top a person with headphones press it and you type your problem and then the person will help you....
Chosen Solution my dog bit my mic off on my astro a50s is it possible to replace it ? @kaisersimps use this Repairing Astro A50 Microphone as a guide. Yes it should be possible only challenge maybe to find a replacement. Consider getting an otherwise broken headset for parts.
Chosen Solution Hello, Can we put in a MacBook Pro Retina 13" 2014 the SSD of the MacBook Pro Retina 15 Pouces 2015 ? Sadly, the SSD’s are different. The newer 15" 2015 model uses a 4 lane PCIe device where as the older 13" 2014 model uses a 2 lane PCIe. They are not interchangeable.
Chosen Solution I don’t have proper connection because charging plug is loose in charging port. On the beginning was possible to “find proper spot” by gently moving plug, but now it is impossible to charge the devise. Kobo uses micro-USB port PCB connector held on to PCB only by solder pads (no mechanical support, some mechanical restraint) so designed to eventually fail if excessive force, lateral or inwards, used to insert USB plug....
Chosen Solution Charger port for Samsung Galaxy S10 stopped working The port is soldered on (thanks a lot, Samsung). It is possible to do, but requires microsoldering skill. If you don’t know how, take it to a professional.
Chosen Solution I’d like to convert my 240d biodiesel to electric using tesla or bolt motor, batteries, charge controller, etc. Some of the hurdles I foresee will be an adapter between the motor and the drivetrain, DC-DC conversion for the 12v accessories, a new 12v heater, needed gauges, and other details. Wondering if ifixit is headed down that road of converting ice (internal combustion engine) vehicles to electric so I can glean from your experience....
Chosen Solution Hello everyone, for a hyper x CLOUD 2, I currently have 4 sons which are: 1 green 1 blue 1 Red surrounded by copper 1 white surrounded by copper. Could someone tell me what these threads belong to? Please Hey! I had the same configuration and this worked for me (thought the audio was pretty quiet which may be due to my lack of soldering skills) pole one - red and gold striped plus copper twisted together pole 2 - blue pole 3 - green pole 4 - White (without the copper wire)
Chosen Solution I damaged it during a screen replacement and i cant find the part anywhere. I was going to just buy a broken one and use the part but they are still in the $300s range. Help? http://www.mengtor.com/product_show.php?…
Chosen Solution Hello, After replacing the battery on this computer, the computer does not go to sleep when the lid is closed. Everything else works fine. Maybe it is a damaged hall effect sensor?. What would most likely have been damaged in the process of replacing the battery that would have caused this? How would I go about fixing it? Thanks! Hi there, Is the display setting set to always on?...
Chosen Solution Has anyone noticed anything to do with time? I have LG42LE4500 with this problem. However, I have noticed that the longer the TV is off, the longer I can get out of it before the picture dies. Less than 24 hours off yields up to 5 mins. 5 days off got it working for 8 hours. So what does this mean? The only way my brain can understand this somewhat is that it s like the TV requires a super cold start, like being on is causing some resistor or capacitor to store charge and force back light off as some sort of safety measure....
Chosen Solution my drip pan on the bottom of the fridge is getting water in it & is filling up within a week. MODEL #ET1CHEXSB01 Hi @peggybyrd What is the model number of the refrigerator? Water in the pan is normal but it should never get to the point of overflowing as the water should evaporate before this happens. If there is a lot of water it means that there is a lot of ice being melted every time the auto defrost function kicks in once every 8-10 hours....
