Posts

Chosen Solution I have several HP Chromebook 11 G2 that have broken power ports. They are out of warranty and would like to see if I can replace the port to try and get more use out of them. Has anyone been able to replace one? I have not tried to replace the microusb charging port, but in reviewing the Maintenance and Service guide documentation for the microusb charging jack, it is part of I/O board, identified by part number 761971-001 on page 8....

Chosen Solution Accidentally changed language to ? ARABIC but want English : 1 . Press the menu icon. 2. Press Settings. 3. Press Locale and text and then press language or in arabic should appear as لغة lugha select english it may be in arabic if so it would be al’iinjlizia Hope this helps

Chosen Solution Every time I plug in my charger now it shuts down my computer or closes all of my windows. My battery life has diminished significantly as well. I have to shut down my computer in order to charge it. Please help! Does it shut down if you remove the battery? IS there any info in the event log? The only thing that comes to mind is that there could be an unexpected voltage drop when the battery starts charging and that the PC is shutting down to protect itself....

Chosen Solution Hi guys, am Travis, I have this iPhone 5s that I just got from a pal. When I opened it up there were no water marks on it, but the problem is that when I connect a battery full of power it starts vibrating then the battery is drained of its power, what could be the problem guys? its definitively a hardware problem…it has to do with the panel…you can contact me on my blog use the contact page or follow this link

Chosen Solution Hi! I have a old dsi from my childhood that i’ve been trying to get to work, but when i attempt to charge the device, the system does not charge or show the orange light at all. i was considering buying a replacement battery and trying that but i thought id ask yalls thoughts first since i am not sure if the battery would be the issue or if its the charging port....

Chosen Solution I accidentally dropped my phone in the toilet :( I put it in rice to dry it out for a couple of days, However i was also very impatient and desperate for my phone so i repeatedly tried to turn it on. Its been about 4 days now and as well as the rice ive also had my phone under the heater and hairdryer to try to get rid of any moisture....

Chosen Solution hi everyone , im brian, i work in a repair shop. i got the next issue with a Huawei P8. i replaced the entire screen (lcd + digitizer) and after i start up the phone i can see that the screen lights up but doesnt show annything, so bad screen i think. tried another one same results. bought another one but this time full screen assembly with the housing , —> ofcourse same result… annyone knows what the problem is?...

Chosen Solution hp desktop smps shows the green light but when i press the power button it does not turn on at all the fans does not spin what can be the issue. i tried changing the power cord but still the same problem. @imran_786 start by checking the power supply. Since you did not give us any idea about what model your computer you can check the generic output for the ATX power supply by following the information on here

Chosen Solution I have an Apple Watch Series 2 since september of 2016, i have taken my Watch into the pool several times, but now there’s like 10 months that my Watch doesn’t touch the water. Now I’m going to participate in a swiming competition. My question in, is my apple watch still as water resistant as new ? and how much time does it take to start losing it’s water resistance ?...

Chosen Solution I don’t see it in the parts list, but it seems like a key part in replacing the battery. I don’t think so. You have to buy that separately.

Chosen Solution What do I do if I dropped my voopoo drag in the toilet? I took out the batteries and put it in rice thinking it would work but it didn’t. I just put the batteries back in today and it only shows the word off and my batteries are fully charged. It happened today. Hi @angie98, As you know water and electronics and electricity are not a good mix....

Chosen Solution Face ID not working because of water damage, and I also need to replace cracked screen. What exactly do I need to replace for the Face ID to work and will it work with the replacement screen. My camera still works just not my Face ID. I’ve looked and don’t want to replace wrong part or any if it’s not going to work. Thank you For face ID to work with a replacement screen you need to transfer the Earpiece Speaker and Front Sensor Assembly from the original screen....

Chosen Solution SPEAKING FOLKS Firmness ? STAND WITH A MOTO G 1 GENERATION , I WENT TO UNLOCK The BOOTLOADER AND NOW IT ONLY ON THE Fastboot SCREEN WITH THIS NEXT ERROR , " Fastboot Reason: falied to boot partition table " Already Tried Installing A ROM BY Fastboot NOT THE RIGHT OF THIS NEXT ERROR IN ALL THE COMMAND LINES “failed (remote) " . THE FIRST COMMAND " flash partition mfastboot....

Chosen Solution Hey, I was just wondering if there was an easier way to test the PS4 while working on it. I keep on messing up and have to unscrew 28+ screws every time because I rebuild it. How can I test it without having to do that? What work is being done on this?

Chosen Solution I had my Nokia 1020 run over by a car and it works fine I just need to get the screen replaced… since it is scratched and a little cracked. I only have 60 and need an LCD Screen Replacement. Can anyone help? I can’t transfer data to the computer anymore though and if I was to send it to nokia they will destroy the data and send me a new phone…… I have so many things I can’t loose off the device like pictures and accounts…....

Chosen Solution I forgot wifi password to my ion camera This should work…I found the directions on YouTube Connect camera to computer using the USB cable2) Turn camera on, it should appear as new drive on your computer3) Open that drive and look for the WiFiChange.txt file4) Rename wifiChange text file to PleaseChangeWiFi5) Choose continue when warning pop-up appears6) Turn off camera7) Disconnect USB cable from computer and camera8) Restart camera and then shut off again, this should reset it9) Reconnect Wi-Fi adapter to back of camera10) Turn camera on, once the green light on the camera is on, turn on the Wi-Fi adapter11) Wi-Fi adapter should have a blinking blue light indicating it has been reset12) Check available Wi-Fi connections on your computer, you should see the camera as an option, the password should be back to the default 123456789

Chosen Solution I Bought a modded GBA, and it was working fine, but the screen was miss placed, so I opened it and put the screen on the right position. When I tested with the gba still open it was working fine, but after closing it, the screen now has no colors, everything else works just fine, it’s only the screen that is now on black and white. I believe it’s a IPS V3 screen....

Chosen Solution After a crash that broke the yaw arm and ribbon cable, I replaced both, and replaced the bent camera tilt motor too. Now, camera and gimbal do not move on start up or at all! I am getting a camera feed to the app, but camera and gimbal do not respond to any calibrations. I’m getting gimbal roll error message in app. Should i replace the entire gimbal camera as I’ve already replaced every part that was broke, or could this be inside the drone itself?...

Chosen Solution Ok, last week I used it to read some books and, as usual, turned it off as I’d finished. This week, I’ve tried uncontable times to turn it on again but it wouldn’t work. I’ve tried connecting it to my computer (because it usually helps when it freezes), but It hasn’t come back to life yet. I’ve tried charging it (even though I’m almost sure it is charged enough to turn on), but it didn’t work....

Chosen Solution My Canon EOS 70D will turn on and take photos. However, the screen is not displaying anything. It will light up, but will be all black/blank. Any ideas? I suspect your panel or the cable from it has failed Canon EOS 70D LCD Touchscreen Replacement