Chosen Solution I forgot the password so I am locked out. I have tried numerous attempts holding power button, back button, volumne - button, power, volume, home button and I have reset it over and over but get no where except to the screen after coby and android logo’s which is where you type your password. I have searched the internet but can’t find any support what so ever. Any help you can give me I would be thankful...
Chosen Solution After spilling liquid in my computer about 6 months ago, I decided to fix it in a tech store. They told me, I had a few components broken, so apparently they fixed the logic board. After a few days of the computer working perfectly, the fan started running loud again, at 6500 rpm. The only difference with what happened before, is that my computer is not running that slow, just a little bit, but the sound it makes is really annoying....
Chosen Solution Hi everyone. Today I got a second hand iPhone 6S, It was listed as “battery and front camera not working” I changed the battery. It made the phone turn on Then I check the camera. As described it’s not working. So I replace the front sensors assembly. And now it’s still not working. I even tried swapping the entire screen and sensors with one from another 6S’s. At one point of unplugging and checking the connection, I reconnected the cameras and the battery, then turned on the phone, and it worked !...
Chosen Solution Is there any other lcd screens than the original that are compatible to galaxy s5? For iPhone the lcd from china costs about 20€ but i can’t find anything under 80€ for Galaxy S5. Can i place any other lcd e.g S4’s? Or is there any websites where i can find a cheap lcd?
Chosen Solution i gt a new battery for my iPod 3rd gen it started to charge a bit on USB but then a strange logo came up on the screen can someone help me I would love to get this iPod working again To charge your iPod 3rd gen, you need a FireWire to 30-pin cable, I believe the only thing you can do with USB on this pod is syncing....
Chosen Solution Getting E3 and F5 on my Kenmore 700 series. Top load washer. I unplugged it for 2 minutes to reboot,,,UNSUCCESSFUL. EASE HELP That is going to be an issue with your lid lock. Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. Here’s a video on fixing it: https://producthelp....
Chosen Solution Samsung Notebook NP300E5A was infected with ransomware. I am trying to solve problem with HitmanPro.Kickstart installed on a flashdrive but can’t seen to get to a boot menue where I can select this option. Help please? Hold F10 + press release power button, in BIOS select the option to fast boot disabled. HI Ella, you can boot on penrive with two ways: (Remeber make a bootable USB flash drive when make HitmanPro....
Chosen Solution My S4 mini is a CDMA unit. Can I convert it to GSM? It is my favorite phone. You probably can but why would you? CDMA is a superior system in my experience. If the carrier won’t (or can’t) support CDMA you would be better off finding one that does in my opinion. I’ve had two phones that I converted to CDMA from GSM and both immediately had MUCH better signal strength and better service and voice clarity....
Chosen Solution hello, i took apart a friends phone to replace a shattered screen for her, everything went fine, and from what i can tell everything in the phone is working properly. i am concerned tho, i was left with this piece, and no idea where it goes. it is a small metal clip with what appears to be a contact point. i cannot recall at which stage in my teardown this peice came loose....
Chosen Solution Hey guys, I did a screen replacement on a Honor 10, repair went fine. Customer returned today and mentioned he couldn’t charge the device as it was getting really hot, I tested it and he was right, the top board was getting very hot. I have opened it up and reconnected everything and now the phone does not get hot, instead I get a message saying the phone temperature is too low....
Chosen Solution Where can I get my charge port micro soldered I need to recommend some one to micro solder The charge port will not allow a charge Its honestly cheaper to buy a new charge port than to fix and existing one. In the HP Chrome book that I have, the microUSB port was partially loose. The port has two parts, one is the steel frame that is soldered to the motherboard at four points around the edges , and the second is the plastic insert that holds the five USB contacts that are soldered at the rear of the port to the motherboard....
Chosen Solution I have replaced the charging port on my iPhone 6 three times with new units. Each time the phone has little or no reception and cannot place or receive calls. I put the original port back in and each time everything works again. I even requested a port from one place that was compatible with Verizon CDMA and had the same results. I don’t know how much longer I can get my phone to charge before the port craps out completely....
Chosen Solution I work in education, and I’ve noticed this happen on multiple student devices. It’s a common issue on C213 devices as well. I’m not entirely sure it’s the network card, as we’ve swapped network cards out before and the issue returns weeks later. I’ve powerwashed and reloaded Chrome OS, but it doesn’t appear to be a software issue. I’ve also noticed that reseating the network card fixes the issue for at least a few days if not a few months, but the Chromebooks always come back with the same issue....
Chosen Solution Heya guys, I wiped the keyboard with a baby wipe, usually I have no issues aside from a funny mouse for a few seconds, but this time it took a few days to dry then I noticed the ‘I’ & ‘O’ keys not working along with a engaged shift key. My brightness shortcuts also don’t work. I left the mac for a few days and came back to find the everything working aside from the I and O keys but it slowly started to play up with he above issues....
Chosen Solution Uploaded the video for your reference. The service engineer from LG said need to replace the display, but I’m still unsure if that’s the case. From the answers here, I believe replacing the led strips might fix this. Still, inputs from folks here with similar past experience with LG tv or any 4K tv with same issue will help. My tv is edge lit, just in case if that’s required for assistance....
Chosen Solution I recently noticed sevrral cracks in my ninja blender pitcher which was a surprice as I only hand wash after each use . This blender is less than a year old so I was wondering if you could mail a replacement pitcher. I thought the cracks weren’t bad but the fluid has started leaking out everytime I use it. Hi, ifixit is not a parts supplier for Ninja products and does not any carry parts for a Ninja Blender....
Chosen Solution car cranks but wont start, found mouse cut the wires inside dashboard. this wire seems connected to TDS. please help me solve the case. thanks. Basudev. probably security system wires were cut by mouse which either disconnected your fuel motor power or current being supplied to spark plugs if these two things are fine then you must check Camshaft position sensor & Crankshaft position sensor for malfunction
Chosen Solution Lately when I use my GBA SP the D-Pad is slightly squeaky and harder to press. Any ideas on how to fix this? Hi! Most of the times it’s caused by the rubber for the buttons. I would order some new rubbers for all the buttons and replace them. BUT, this can also be caused by the actual button(s) soldered on the motherboard. If this is the case, you need to de-solder the broken button(s) and replace it with a new button(s)....
Chosen Solution I’ve been experiencing a black bar across the top inch of my screen. When I take a screenshot of the full screen, I can’t see any of the problems in the picture, so it seems to be a display issue. I’ve tried doing a NVRAM reset, but that hasn’t really helped. What does seem to work temporarily is closing my Macbook lid for long periods of time, and also shutting it down every night....
Chosen Solution My son drop Xbox 360 on floor now the disc tray is jammed close There is a small hole in the grill on the left side next to the disc drive, get a paper clip and you should be able to slowly open the drive, also this may be helpful; http://support.xbox.com/en-US/xbox-360/c…
