Chosen Solution i rooted my blu studio x , thought i had backed up apps an info to sd card, which i didnt an deleted android system by accident. An all Google’s apps began to fail an shut down Now my phone is stuck on black screen, i can turn it off an back on but it just shows the Blu logo an then goes black screen. How do i get the Android System back on Blu studio x without a computer (if possible) if not still need help....
Chosen Solution I bought new C5 Samsung, I just insert my sim and got message to update software, while updating it became Turn Off and now am not able to Turn on. Could you please help me on this problem. Thanks. i am also having the same problem but i think it is a problem with the actual phone
Chosen Solution I have access to a Macbook Pro display assembly that has liquid damage that unfortunately does not power on but the glass itself does not appear to be damage at all. I also have access to a Macbook Pro display assembly that has cracked glass close to the hinge of the laptop. Is it possible to somehow take the none broken piece of glass and swap it over to the other display assembly that is still functioning?...
Chosen Solution does it save battery life when we adjust the brightness lower? Yes, a bright screen will use more power than a dim screen. of course the bright screen need higher voltage of electricity to get brighter
Chosen Solution I’ve also just pulled the bottom cover off to take a look and it seems there may be some room for a secondary SSD/HDD in addition to the included M.2 drive. Am I understanding this correctly? I don’t want to futz around with it much before knowing what’s possible. @printedwaffles the RAM cannot be upgraded. The Yoga 2 13 has 2 slots: 1 m.2 (that is now used for your SSD) and another connector for a 2....
Chosen Solution IPhone now will work if plugged into computer. Otherwise, it won’t boot up. How do I unjam the power button? You may have to take it apart, and see if you can free the button from the aluminium back cover. It’s not easy, but doable - and beats having to get a new phone Thanks so much for responding. I’ve watched the youtube videos on how to take off the back cover....
Chosen Solution The unit has power, lights and the sound of a motor buzzing, but the dryer does not start to spin. Cause 1 Thermal Fuse The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good....
Chosen Solution My wife’s car is a 2010 Kia Optima. She tells me that when she’s driving in the rain or hits a puddle or a car passes her and splashes water on the passenger side of the vehicle the engine stalls, the steering wheel locks up, the battery light comes on and the belt squeals. The car doesn’t do it when it’s dry. The belts and everything are on the passenger side....
Chosen Solution flashing number error c4eba341 unplug printer power cord from back of printer, hold down power button for 10 seconds. Plug printer back in . power up printer
Chosen Solution Hi, I have a galaxy tab s6 lite. My sibling spilled water to tablet and it started to heat around the top of the tablet. Screen works fine for 10-15 seconds and stripes appearing at screen. I turned off tablet for a while and problem is still there. Can anyone help me? Alper this “started to heat around the top of the tablet.” is a pretty good indication that you have something shortening out or already failed....
Chosen Solution So my husband’s watch gets extremely hot when on the charger and goes from 100% to dead in a little over an hr! What can it be? Does it just need a new battery? The watch was fine a few days ago For me, the cause was moisture that got into the heart rate sensor after the adhesive holding the glass over it failed. I thought I was safe because I had replaced the glass and adhesive fairly quickly and I keep my watch dry, but I started experiencing issues a week or two later like you describe....
Chosen Solution Looking for a replacement glass panel, but I am not sure which one will work. Any ideas? follow the steps LINK for low price glasses LINK or you can google you will get more options If you r looking to replace the glass only, then you are in hard luck. In this machine, the glass is glued to the lcd so you can’t replace the glass only as in the previous models (a1278)....
Chosen Solution when I was 2 ft of the ground to take off, one motor quit working causing the drone to crash but no physical damage was done. Now nothing seems to work anymore, I can’t start the unit, does not even make sounds or any led’s are working, I did try another new battery but with the same results, I really wish it would start again, the unit is only 3 weeks old with about one hour of flight time on it....
Chosen Solution I have replaced coil, carburetor, fuel pump, and filters. The cat will turn over but will not start. I have squirted gas into the intake and get fire out of exhaust port but still not start. I have disconnected the ground on the rpm limiter and same thing. I have checked all the limit switches and all are working. I have fuel flow at the carburetor. I am out of ideas can anyone help with an idea....
Chosen Solution I installed an OWC SSD drive a secondary drive on my iMac 27" mid 2010 (2.93, i7, Mavericks 1.9.3) following the ifixit guide and the OWC video. On my model there was an extra unused SATA port on the logic board. I left the original Western Digital HD in place. When I put everything back together I forgot to push the RAM back in properly and got a black screen and one loud beep every 5 secs....
Chosen Solution I have an original game boy and recently I changed the body. I believe the problem existed before. The screen appears to be not aligned with the body and in addition has two white lines in the center. What may be due? Could it be the video connector? I have already tried to enter it several times but the screen remains not centered. The vertical lines are most likely due to connections with the data ribbon leading to the screen....
Chosen Solution So my girlfriend accidentally closed her Nexus 5 in her car door. The phone has a slight bend in it about a third of the way down from the top. The screen is not cracked, but there is some discoloration on the screen where the phone is bent and it doesn’t register any input from the touchscreen on the top half of the screen. If you try to bend it back, the screen starts to work a little bit, but it is hit or miss....
Chosen Solution i have decided to boot my laptop yesterday so when i started it , it said it needed an external drive for data transfer or whatever , so i connected my personal hard disk with space 1 tb . Now after the boot is done when i connect the hard disk back it shows up with the name Data E and only has 75 gb of space in which 50 gb has some of this boot related files....
Chosen Solution Hey just a bit confused as to why one of my iPhones wont turn on. I’ve got an iPhone that wont turn and another one that works perfectly fine, i switched over the bad screen to the good one and it was working, then next i tried the dead battery in the new phone, nothing. So then i put the good battery and and good screen on the bad phone, as i was starting to put the screen on after the battery it started getting really hot and still wouldnt turn on....
Chosen Solution A TV image is clear and becomes distorted The capacitors look intact And also sound electronic boards Mise à jour (06/02/2018) board t-con Sounds good As well cables ribbon where is the problem Update (02/08/2018) liquid in that arrow I thought it existed from a factory Shall I wipe it? @medjdoub45, If your television has image distortion issues, see the Insignia NS-24ER310NA17 Has Image Distortion problem page for possible causes and solutions....
