Posts

Chosen Solution Dishwasher brand: Whirpool Model: WDT790SAYM3 Whirpool dishwasher diverter valve is not spinning. I have checked the voltage on the blue leads to the diverter valve and I get only 10V 60Hz. One of the youtube video was saying it should be 120V 60Hz. I also checked the diverter pump with by directly applying 120V 60Hz to the diverter and diverter is working. What else can be broken that will reduce voltage supplied to the diverter valve?...

Chosen Solution My friend dropped my phone outside face first and the screen cracked the whole screen. It turns on and off and the screen is normal looking, but the touch doesn’t work anymore. I can’t unlock it or anything. Can I get it fixed? Or do i have to replace it? Matthew Enriquez, you will not have to replace your phone, but you will have to replace the display assembly....

Chosen Solution hello, I seem to be getting multiple issues of the dock not working on the tv. you put it on the dock and the light in the lower left illuminates indicating it has recognized it and from what i can tell it is charging, however it does not show on the tv. i would imagine it indicated a problem with the HDMI but has anyone encountered it or know how to fix it?...

Chosen Solution I tried to downgrade my BIOS and now my laptop won’t boot windows. I would like to put back the last BIOS I had but I can’t do it. When I try through AFUDOS I get the error BIOS write protected. The write protection usually can be enabled/disabled with jumper on motherboard, but with this pc there isn’t this option, you only can replace the chip with BIOS with another and flash it, but you need the ....

Chosen Solution Drone will take off straight up, but immediately returns home. Flys great in the daylight, but when darkness comes, it immediately will return to home base. Do I have to fly with lights on? What am I doing wrong? This is probably not a hardware issue, but a feature. I have a similar model, and I do believe some of these have settings that prevent night flight. Consult DJI or your manual for this....

Chosen Solution We have similar problem. We use the dryer vent cleaning apparatus with the drill and there is no clog. But it will cut off if vent hose is connected to dryer. If I don’t have it connected. It will dry a load of clothes. We did have a dryer repair man come out to replace the heating coil. It’s snapped right away when he turned it on .He took it away and brought it back....

Chosen Solution Hi What is the most current OS I can install once I perform the requisite hardware upgrades for my Early 2009 17” Macbook Pro? Thank you! -Joe The highest OS this system can support is OS-X El Capitan 10.11.6. This series can only support a max of 8GB of RAM and the HD SATA port is only able to support a SATA II (3.0 Gb/s) drive. Make sure the drive you get clearly states it can support it....

Chosen Solution Hello all, my Early 2011 13" macbook pro is no longer turning on. what happens when i turn it on is that it sounds like its about to start then i hear 1 click from the hard drive and it shuts off completely. nothing happens on screen. the macbook can still charge and battery indicator works perfectly fine. this all happens within about 10 seconds. this makes me believe the hard drive is going out....

Chosen Solution El Capitan bootable usb flash drive isn’t showing up. I used trans Mac but it won’t show up when I hold down option please help I’ve never had any luck with TransMac. Can you find a friend with a Mac that can help you who has El Capitan on it. Be aware You need to back date your systems clock year as the installers certificate window of use has expired!...

Chosen Solution Alright, I have had it with this iPhone, I tried to update via iTunes and everything was going smoothly until bam “iTunes cannot update the iPhone “iPhone” an unknown error occurred (-1) so i tried again with the same result… Then I read to take out the SIM card and do it and when I take out the SIM I get error 56. I assume at this point its a locgic board issue so I read up on it and I tried replacing the dock connector, I heated up the Baseband chip I froze it in the freezer ect....

Chosen Solution HEADS UP. I HAVE BEEN LOOKING ON WHAT TO DO FOR HOURS. I’m completely stubbed. So it make it easy to understand why i haven’t been able to fix this its story time. The first time it happened I had my ‘wave’ home screen already loaded on my profile. I inserted my favorite Blu-ray movie that I’ve watch already this week. Nothing new. After closing the top the ps3 normally will already start to load your disk without having to select anything....

Chosen Solution Hello! I have just replaced the internal HDD of my Mac Mini with a Crucial MX500 SSD, in the process of moving the logic board I pulled it out too far which disconnected the wires from inside the logic board connector of what I believe is the optical drive sensor. I have inserted the wires back into the connector but even so I’m having an issue with the fans on full speed....

Chosen Solution I replaced my iphone 8 screen with one of the replacement screens from ifixit. Everything worked just fine on the screen. I have no issues with touch feedback, swiping, typing, etc. But I noticed that when I am in the messenger application (or any application that brings up the keyboard with a text cursor) I am no longer able to hard press it to move the cursor. UPDATE: I can move it but I found out that I have to press unusually hard, and that doesn’t seem right-I only did it twice....

Chosen Solution I forgot my screen lock code and can’t power off to perform reset what’s next option? Press and hold power button and both volume buttons to force reboot your device. After force reboot immediately press and hold hard reset combination buttons. it will take few attempts and then you will reach to recovery mode to wipe/factory reset your Samsung device. If you have the Samsung device then after factory reset it will FRP Google account locked to unlock it follow this guidelines....

Chosen Solution Machine has been overheating. Tests verified the IO and CPU_MEM fans in the front fan assembly are not spinning (they stay at 0 RPM during a fan test, no visible movement). After removing the fan assembly I noticed the cable connection to the port on the logic board was kind of smushed and bent. It looks like someone tried to force the fan assembly into place. I was able to fully seat the cable in the port, but am still not getting any fan spin....

Chosen Solution Hi, I was wondering if there was a full housing replacement guide? Looking to do this but the videos don’t say which screws are different and ifixit does You can built screw guide so each screw goes into a hole in the diagram of the phone. the mat is magnetic and you put each screw take off on that spot and take it off when you are putting it back together....

Chosen Solution why do I get a Need’s Paper when the paper tray is full? The printers I have usually give this error when the paper is not coming out of the tray. Either the paper is not fully up to where it needs to be in the tray for the roller to pick it up or it could be too much paper has been loaded into the tray and it’s stuck....

Chosen Solution While replacing the click wheel, I broke the hold button cable. Can it be replaced?and if so how? you could always buy a broken ipod (maybe a water damaged one) off of ebay or some place like that and use its hold switch from that. however it would require some fine soldering. If you aren’t up to repair via david’s direction, you would need a new logic board assembly, unfortunately....

Chosen Solution The pixel buds disconnect whenever they are removed from the case. I think the batteries are bad. Is it possible to replace the battery? I don’t believe it is possible to open these earbuds without damaging the casing. Therefore, you cannot replace the battery. Hi, Here’s the Ifixit Google Pixel Buds 2 Teardown guide which shows how to open the ear buds. The guide was only to show the internal components and is not intended as a repair guide because of the damaging way in which the earbuds have to be opened....

Chosen Solution Hi Folks I’m trying to fix a floor cover for a water ski compartment in the floor of my boat. Unfortunately its proving challenging to get the part replaced via the manufacturer, so I’m trying to see what solution I can come up with. I’ve looked into plastic injection moulding as an option to replace it, but its rather expensive. For now my preference would be to see how could I fix the cover itself and ensure its still aesthetically pleasing....