Chosen Solution Michael koors watch totally dead lost charger watch not used for over one year can you recharge its battery and get a universal charger? Watch is 3 years old Brigitte Hall do you have a model number for this watch? Check the back etc. and see if there is anything that might identify the model. Yes, you could get a charger for it but would need to identify the model....
Chosen Solution Hello guys, I own a Samsung Galaxy S2 and when i received it it was on Android 2.3.5 . It was running well so i decided to upgrade it to android 4.1.2 using CyanogenMod. The installation of this mod was a success although after that, When I tried charging it and connecting it to my laptop, It wouldn’t charge. The charging symbol was showing for seconds and then it disappeared....
Chosen Solution Tourx tools to fix holden astra alternator 2002 model Remove air cleaner housing with hot film mass air flow meter and air intake hose - see illustration “Air duct X 20 DTL, Y 20 DTL” and “Air duct Y 20 DTH up to MY 2003” or “Air duct Y 20 DTH as of MY 2003, Y 22 DTR”. Remove lower engine compartment cover – see operation “Lower Engine Compartment Cover, Remove and Install” in group “A”....
Chosen Solution I’ve got a defective 13" MB Air from 2011 and wonder, if its SSD fits into my 2012 iMac to set up a Fusion Drive. Do you have any experience, if this works? I mean the SSD Connector at the back of the iMacs Logicboard near the Connectors. Yeah, both of them have same connector. It should fit perfectly! Good luck!
Chosen Solution Does this printer use pigment ink Your printer is a Epson Expression ET‑2650 EcoTank Color Ink‑jet ‑ Printer This printer appears to use normal dye based ink cartridges: https://www.amazon.com/Epson-T220120-BCS… Dye-based inks are the standard ink type used in inkjet printers. They consist of colorant that is fully dissolved and suspended in liquid. Pigmented ink consists of a very fine powder of solid colorant particles suspended in a liquid carrier
Chosen Solution Hi there, I have some T3 screws, at least it used to be until it’s pretty much stripped. I have try tipping the screwdriver with cyanoacrylate, hammering the screw head with a flathead screwdriver to create a slot, rubber band. I’m seriously considering to drill the screw since some are recessed, so I can’t dremel it. Here are the specification of the screws. 1.38mm stem diameter 2.68mm head diameter counter clockwise to unscrew I’m considering to use a 1/16" drill bit....
Chosen Solution How do I fix the porblem Open an elevated Command Prompt window. To open an elevated Command Prompt, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. Type the following command and press ENTER: rd /s /q C:$Recycle.bin –> Replace C with the drive that is giving this error (i.e. what drive letter is the passport?). Type exit to close the Command Prompt window....
Chosen Solution Hey, i got an iphone 6 from a friend. I’m trying to recover the data from an damanged logic board. The phone died over night while charging. With a multimeter i checkt for shorts on vcc bat on the bat connector. Bat which shows no short. The vcc_main line shows a short. I already desoldered the two caps near the backlight ic. The short still exists. Then i tried to find the fault with a bench power supply....
Chosen Solution The hinge covers on my aspire broke off which means the display cable is exposed. How easily can these parts be replaced? although i do not have much experience with this type of laptop, my answer would be no because you would most likely have to take apart the laptop and transfer parts on to the new display housing. unless you have a vast experience with laptop disassembly and repair, i would not recommend attempting it....
Chosen Solution Hello, my Mac restarts randomly when I am not using it for more than 1 hour. Also when I put it to sleep for at least 3 hours, it will no longer wake up forcing me to force reboot. Crash report 1(Nov 11, 2019): http://dpaste.com/262MZ89 Crash repot 2 (Nov 11, 2019) http://dpaste.com/0K9X8D8 Crash repot 3 (Nov 12, 2019, 6:42PM EST): http://dpaste.com/2K48SE9 Appreciate any inputs iMac (Retina 5K, 27-inch, Late 2015) Version 10....
Chosen Solution I tried to fix a stuck shutter button, and used a contact lenses cleaner liquid to pour in it according to a recommendation online…Well, that was a bad idea, now my camera doesn’t work at all. It won’t turn on. I’m guessing the chip or whatever it’s called, got shorted. What I’m asking is where can I view the blueprint and find the name of each chips (or board, or whatever you call it inside the camera) so I can order the correct parts I need....
Chosen Solution White vertical lines on screen and photo won’t go away. I’m not an expert on digital cameras by any means, but I do understand the technology behind them, so here are my thoughts on this problem. First off, the lines you’re seeing obviously aren’t an artifact of a damaged screen. On other devices like cell phones with display issues you’ll see the problem on the screen but if you take a screenshot it won’t show the problem....
Chosen Solution I plug in the mod to the charger and it won’t charge the batteries. I think it’s the charging piece, but I don’t know what to do. I just got the Alien mod yesterday and can’t charge on my wall plug block either. I have been reading everything I can find and I think the answer is actually simple. You just aren’t getting enough power through the wall block....
Chosen Solution Hello, I have a 5s that is in perfect condition, but it has some problems. 1: Compass doesn’t work, just shows nothing in compass app. 2: Gyroscope doesn’t work, again just shows 0 degrees and the “perspective” background doesn’t move. 3: Touch only works when your finger is touching the chassis, if it is on a table and you are not touching it it does not recognize any touch....
Chosen Solution Hi guys, I tried literally everything what I found on the internet but nothing is working for me… I updated the computer few days ago and from that point I have an issue. The computer is working but sometimes after 30 minutes, sometimes after four hours it just freezes, then there is black screen, then I have to restart it and then everything is normal until the same thing happens again....
Chosen Solution So I was playing and I forgot I was still holding my controller and went to p1ss so that yanked off the cord from the circuit board. Years later I tried to reconnect it using a cord that I found, (not for controllers but had 4 smaller wires) and soldered it to the circuit board. Doesn’t work. What do? Hi @densetsu OK well looking at the pictures we may be able to work something out....
Chosen Solution 2006 KIA Sorento 3.5L engine. Will be replacing water pump and timing belt, but ran into an issue that won’t let me continue. Car was running perfect prior to starting this job. I’ve done several timing belts and water pumps on various vehicles. I’ve removed the upper and lower timing belt covers and associated components. I lined up the timing marks on the four camshaft sprokets. Don’t want to continue until I clear up the issue I have....
Chosen Solution I had a problem with my Deebot. First the battery level stayed at 60%, it is charging (the app told me it is charging and the button is flashing). but the battery level didn’t increase. After using the bot to clean the floor the level is 10%. Again it keeps loading but the battery level didn’t increase. So i replaced the battery with a new one. This one was charged 70% from factory but now i see the same thing happen, it is charging now for a few hours but the level still is 70%....
Chosen Solution I replaced a digitizer with a cracked glass mainly in the top left (next to camera). Everything seemed to go well. Removed the old digitizer, then the lcd (being careful). Once i got it back together the new digitizer looking at it with the home button closest to you and the camera on top… well the top from left to right about one inch down will not work from touching it....
Chosen Solution Hello, One day my display just didnt turn on anymore. everything else works fine (i connect my Macbook to an extern screen to use it) also i noticed, that you can see the display realy dim in some angles… so it isnt completely disconected it seems. Here is an image once normal and one overexposed, so you can see that the screen is still slightly on. Is there an opportunity where i can look for a quick fix?...
