Chosen Solution Hi, I have already upgraded the ram and it can only see 10 gp and upgraded SSD as well. my question is, can I upgrade the CPU and GPU as well? Is it worthy? thank you! Hi, Short answer is no. The CPU is hard mounted (non-removable or not worth it if you are able to do it) onto the systemboard and the GPU is integrated in with the CPU i....
Chosen Solution How do I repair a cracked touch screen glass on Samsung Galaxy S4 mini? i found the replace guide on youtube Direct lcd replacement is far easier, but expensive. The glass, is mcuh cheaper to do, but difficult to start. If you have a heat gun, get a temperature reader, if you end up buying an lcd, you might as well try it, I have a heat plate for mine (this is a side line for me), and I keep the glass at 75 Celsius....
Chosen Solution Just replaced a faulty fan of a MBP 13 inch late 2013 (free gift, just needed the fan replaced). After Installing I went testing the fan and did not seem to get it on a fixed RPM. I ran a diagnostics and it gave me back the PPF003 error. After further inspecting I might have damaged the cable? Is it the cable? Can it be something else? The weird thing now is that Mac Fan Control says that the fan is spinning, but in reality it’s not doing anything....
Chosen Solution So I have in the past replaced a lot of batteries in various iPhones without any issues. Recently however I have had a couple of iPhones generally in the 6/6s range that have had a poor battery life and a new battery hasn’t fixed the problem. I almost certain that it is not a bad connection and I would like to think that the batteries that I am buying are not the issue either....
Chosen Solution Kitchen aid dishwasher is washing well but is noisy especially when beginning. It sounds like electric transformer in the rain. Loud buzzing which is returning during wash cycle. However it washes well. Could be water inlet valves. I agree, inlet value, it is a magnet value when turned on you hear the magnet working. fallow your water inlet line, to find a small part with electric wires coming out of it....
Chosen Solution I noticed that the display screen looks as if there are spotlights only lighting up parts of the screen. The places in between the ‘spotlights’ are dark and shadowy if that makes sense. It is not my computer but a family member’s computer. Is there any way to fix this? Apple MacBook Pro “Core 2 Duo” 2.4 15" (08) Specs Identifiers: Early 2008 - MB133LL/A - MacBookPro4,1 - A1260 - 2198 How about that, a Nvidia GeForce 8600 GPU as I suspected....
Chosen Solution I followed the instruction to replace the LCD, but after reassembling it the display won’t rotate when flip the LCD for a selfie. I noticed there were two magnetic elements, not sure whether I’ve placed them correctly. have you solved your problem? You know where square magnet need to be placed? the little magnet is inside the frame
Chosen Solution Hi! I’m looking to replace the SSD on my A1708 Late 2016 13” MBP. Looking at AliExpress, I see that there are different part numbers for the SSDs. There’s 656-006A, 6560074B, to name a few. Is there a specific PPN for my model or should all of them work just fine?
Chosen Solution I am interested in buying an 830 but am being a bit put off by reports of the touch screen not working when it is wet. Has this be fixed with recent softwear updates or is that not possible. Hi Chances are that it hasn’t and won’t be fixed as most touch screens aren’t designed to be used underwater Most smart devices have the same issue and it’s mostly hardware related I wouldn’t let it put you off though as you will see this sort of thing on most smart devices Hopefully this helps Any questions please ask Thanks:-)
Chosen Solution I have driven this vehicle from CT to TX and back, I am about to do it again. I am not the original owner, I am the third owner and I have had it since 2015. I keep up with all oil changes and have had the brakes done, new tires and all belts and fluids checked ( radiator hose was replaced) No serious problems with the car as far as I can tell....
Chosen Solution I set my alexa in the garage on a supposedly unstable surface, and it fell. However, it didn’t break on the outside, but now, even when she is plugged in, she won’t respond to me. What should I do? What iss the point asking for help if you aren’t gonna accept what was given to you? &&^& outta here.
Chosen Solution Hello I have Samsung dryer model DV431AEP/XAA dryer was working fine then next day I had no power to the dryer at all check braker / thermal fuse and still no power anyone need help? Hi @analisa24, Did you check if there is power available at the wall outlet, you didn’t say? If the wall outlet is OK, disconnect the dryer power cord from the wall outlet and then test the cord using an Ohmmeter to prove continuity of all the wires in the power cord from the plug into the dryer....
Chosen Solution Packard Bell Easynote LS11HR Hello, DVD drive connect to motherboard with SATA1,2,3?I have 500gb HDD & DVD rom, which i want to swap with old HDD or new SSD, if I place old HDD on DVD place - new SSD better placement to DVD or HDD slot?What is the best option, according to speed, generation of SSD which can be mounted Sorry for my eng.) I replaced an HDD with an SSD as the system drive and put the HDD in the DVD slot....
Chosen Solution Hi everyone So i know the face recognition needs all the original components to function, but does anyone know if the Flood illuminator, Proximity sensor, and ambient light sensor can be swapped over to a new camera/earpiece/flex assembly? the fault is in the ribbon cable, i could repair but that is a lot more work than swapping components. thx in advance Our logic board tech has been quite successful doing this in he past, I would contact around a few repair stores that have an experienced board tech to do this repair....
Chosen Solution I replace the new screen of iPad Air 2 successfully with original same home button. Everything works except finger prints failed. I tried to fix from software but finger prints does not work, only home button function works. Any idea what is solution ? Inspect the home button ribbon cable for any damage or tears. Also make sure it is seated all the way in the connector.
Chosen Solution Two yr old Frigidaire top freezer LFTR2021TFA Sunday: frig warm. Noticed hadn’t hear the characteristic singular ‘knock’ heard every so often during day . Unscrewed back freezer. Huge block of ice on evap coils, down vent. Melted with hair dryer. Noticed evap fan spin a few seconds, stop, spin few seconds, but that was with panel pulled back, door open etc. Moved food away from vents best I could....
Chosen Solution The push-in style power cord for my Hamilton-Beach M/N 40622R gets worn very easily and will not pass electricity to the percolator, becomes unbearably hot…or both. It appears the inside of the plug and the contacts on the pot become corroded over time which inhibits electrical contact. The contacts in the plug also become ‘splayed’ out, which also inhibits good electrical contact. I have tried 2 different Percolators, 3 different after-market cords, with little success....
Chosen Solution Like the title says, I have a Panasonic 3DO FZ-10 and when powered on it shows purple horizontal lines across the screen, the board looks fine and I’m trying to find a good starting place to check and see what’s wrong with this console, there is this chip that someone said was an rgb mod, maybe this could be the issue? I know the power supply inside is a new one because the old one was burnt out when this unit arrived probably due to the wrong voltage so I got this replacement unit and it tests out okay Update (11/05/2022) I should also mention that I did try composite as well as S-video and they are both doing the same thing....
Chosen Solution Dear All !!! I Bought Samsung Galaxy s5 from USA (Samsung Galaxy GS900V). Now its not charging. I tried my charger with another device and its working fine. Tried my battery on other phone, its working fine as well. I cant claim warranty now and I took it to a local guy, he tells me that my phone’s charging IC or port is gone faulty. Can anybody help me out?...
Chosen Solution I have 2 1980 Suzuki FA50s and they are both leaking gas BADLY. The leak always stops at a certain point and leaves a small amount of gas in the tank. I decided to pull the tank out to have a look and here’s what I found. The gas gauge, which seems to only exist on the tank in the 1980 models, is leaking from underneath. I don’t see any screws or anything that tighten it in place....
