Posts

Chosen Solution Small amount of drizzle on my MacBook Pro left unchecked and used for a few days. MacBook worked but then screen had a few rain spots. Then the battery stopped charging (don’t hold me to that part it was a while ago). Then it wouldn’t turn on at all. I saw in previous posts that people were able to use their system with damaged batteries without it charging their battery (like a desktop), but if their battery power got to 0 would they even be able to use their system in such a state?...

Chosen Solution I’ve had my 2DS (UK, Europe) for about five years now and have dropped it quite a few times. This morning I dropped it by accident whilst it was charging, and it would not charge anymore. Everything else works fine, it just won’t charge when plugged in. I have a feeling I bent a pin or something, but I don’t know how to fix it. I will try to help....

Chosen Solution Hello, my DC44 is not charging. Bought a new battery but the wall charger does not illuminate. I have thoroughly cleaned the brush etc. Before buying a new wall charger thought i’d try here first just in case there’s a fix. Thanks. Hi Chances are if a new battery isn’t doing the trick it probably is the charger For Dyson chargers there aren’t really any fixes apart from opening them up which can be dangerous due to them being power supplies which can give you a deadly shock if handled incorrectly I personally have had Dyson chargers start acting strange for a bit when they get to a sertain age (probably just my bad luck though) Just a little recommendation,I tend to prefer getting a authentic Dyson charger as non original chargers can damage them selfs and the dysons battery Hopefully this answers your question If not please do not hesitate to ask me anything even if it’s not to do with this dyson Thanks:)

Chosen Solution Let me start off by saying i am not very knowledgeable on these things. I have an old non working MacBook Air 13” Mid 2012, that still has a lot of my old files on the SSD that i need. I have been looking for an SSD enclosure to usb so i can transfer all of my old files, but i can’t seem to find the right one. I have already bought one thinking it was the correct one, but alas....

Chosen Solution Every time I try to connect to my wonderboom it says connection unsuccessful, when it was working I’d bring it into the bathroom when I shower but the steam shouldn’t affect it because it is supposed to be waterproof My wonderboom does this once in a while. Just go into your bluetooth settings and remove your wonderboom from your device. Then pair your wonderboom with your device again to reconnect it....

Chosen Solution I have the Maytag Bravos quite series 300 washing machine. I took out the tub part, clean everything out, then I replace the drain Pump. Now it will Drain. But now it fills with water, then it sounds like its revving up for a few seconds, then starts draining water [all the water does drawing out] (time left for the washer goes to 5 minutes). Then shut-off. It missing the agitation part, rinse part The model # MVWB450WQ1 SER - C02070905 Type - 580 What do I need to do....

Chosen Solution Nothing happens when I move the film advance lever it just goes round and nothing happens any springs or something I should know about just brought it Hi Mason! I wonder if any of the troubleshooting that we have on our website here would be helpful to: Minolta X-370 Troubleshooting — maybe some things you haven’t tried yet or are willing to try again. Otherwise, would you mind providing a link to a series of photos or a video of the issue that is happening once you have inserted the film into the camera?...

Chosen Solution Finger print is not working. Fsasil Nega follow the Samsung Flowchart. All those parts are located on the sub board. That is the daughter board where the charging port etc. is mounted to. Make sure that the flex from the main board to the sub board is properly seated and has no tear etc. Here is the location for the finger sensor

Chosen Solution Hello I attempted for the first time to desolder and attach some new switches. Things did not go well… I thought a fix would be to follow this guide: https://www.instructables.com/How-to-Rep… Upon completion there was still no contact with both M1&M2; here are the photos after I cleaned up. In the first photo as you can see I attempted to cut the excess copper before solder, not sure which method would have worked better considering the copper adhesive would move even after being heated which was expected....

Chosen Solution I was driving one day and my check gauges light came on in my 97 Jeep Grand Cherokee Laredo 4.0 6 cylinder 4x4 and when I push on my brakes on my gauges go down to zero and then when I step on my gas if they don’t go back up to normal and then like a mile down the road it died on me and my alternator is good they say and they said my battery is good...

Chosen Solution Hi, I recently bought a new battery for my Galaxy S10 from Ifixit. The install went fine but the phone seems to believe the new battery is the same capacity as the old one. I’ve been looking at the charging info on the Accubattery app and its only putting 2900Mah of charge in the battery but it should be going to 3300Mah with the new battery. I followed the calibration instructions sent by Ifixit (Charge to 100% + 2 hours, fully discharge then charge fully) around 3 time now but still getting the same results....

Chosen Solution Hi there, I have an Mid2014 Retina and used it very often like 8-12 hours a day. A few weeks ago I got the message to change the battery. In my holiday (from EU to Mexico) my macBook worked for about two days and after that I can’t power it up anymore. I replaced the battery yesterday. The MagSafe was showing a Orange light and today it’s green. So I think the battery is fully charged....

Chosen Solution I am trying to replace my 12 Pro power button cable and I see it is bound to the wireless charger. If I remove that flex and install the one without the wireless charging, will the phone work? hello Mister Marki, yes, but you must be aware that you will lose the inductive charging function. Tapes without an induction coil available on the market are just a cheaper version of the one with an induction coil....

Chosen Solution I just replaced the logic board and i could only install OS 10.8.5 High sierra is refusing to install. Is it due to firmware issue. What should i do If you replaced logic board you probably need set up correct date: https://bensmann.no/changing-system-date… after should be everything OK.

Chosen Solution I replaced both the screen and battery in my surface pro 3 i7 256gb tablet. Yes both bridge connectors (Shims) are in place. I even tried swapping the bridge connector from the keyboard ribbon connect to the battery connect in Hope’s it was just a bad bridge connector. I’ve tried factory resetting, uninstalling battery hard drives, hard reboots, visually inspected diodes and conduits running along mother board. Nothing seems to be fried or out....

Chosen Solution For some reason, if I connect my computer over VGA, it fills the screen perfectly at 1080p but if I connect my computer over HDMI, there is overscan and the picture is cut off. I checked the settings menu but I tried all the options in the TV menu and the picture size was set to normal and it didn’t fix the overscan issue. Is there any way to fix this overscan issue?...

Chosen Solution my pc is hp 240 g5 it working properly but while i connect charger the indication LED starts to blink in orange and white wht can i do Hi @achuthan , Does the laptop work OK just running on the battery, without the charger connected? If Win 10 is installed, create a Win 10 battery report and check the status of the battery i.e. design capacity versus full charge capacity to make sure that it is still OK

Chosen Solution Could u kindly repair the damaged Samsung S6: Replacing touch screen replacing back cover other materials while replaying touch screen around 100USD, in latin america i work in a cell phone tecnitian and that its our cost (the Screen and the touch i think you can buy it on e-bay at a cheap price, but some times isn´t original just AAA copy, sometimes works or not)

Chosen Solution My CTRL buttons don’t work anymore. I contacted a repair shop and they say they may have tor eplace the whole keyboard, which means the whole base of the laptop. Which defies the whole purpose of taking it to them. I guess I can just buy one myself. My question is is it possible to get just the keyboard on the market? Also is it possible to fix the buttons without having to change the whole base?...

Chosen Solution I had my iPhone for about 2 weeks and all was well but then it died one day and didn’t turn back on nor did it charge, it’s now been about 2 months and i have tried absolutely everything but nothing seems to be working, do i need a battery replacement? Hi Ash Have you tried taking it to the Apple store? They may replace it for you for free ....