Chosen Solution The main snap together wiring was removed while the engine was running. Now runs super retarded. can I reset? With the engine off, cycle the ignition on and off 3 times quickly leaving the ignition on the last time. The odometer will display the codes in the PCM. f the codes are not active you may be able to clear them with the odometer reset button. If this does not work you will need a OBD scan tool to clear the codes....
Chosen Solution So, my mom needs an older computer. I own some laptops from the late Vista, early 7 era. I gave my mom my Pavilion Dv6-1245dx. I put a fresh install of Windows 7 on it (only because I didn’t have a Windows 10 flash drive ready) and then I realized that I forgot to install Office. I went to install Microsoft Office, the computer didn’t start. It powered on, but the screen was off (I didn’t even get the HP invent logo)....
Chosen Solution I have a Surface Pro 4. I want to make sure that I get the correct screen replacement. Is this the correct one? Surface Pro 4 (1724 v1.0) Screen I want to make sure that this is the coorect one. Is this the same as LTN123YL01? can i have your full model number please
Chosen Solution HI, I have (now) 2 iMac’s mid 2011. My old ones graphic card died, so I looked for another 2nd hand and found a great one with an 1TB SSD iso 1TB HDD. In order to transfer my old data set up from my broken iMac, I removed the HDD in order to be able to install in a dock station and so recover / restore my old programs, settings and so on....
Chosen Solution hello i wanna ask you a problem with iphone 6s. so at this time my iphone 6s at the time of airplane mode there is a decrease in the percentage of the battery without me use. I’ve tried replacing the battery with a new one but it still happens. What should I do? is that a problem with ic? Thanks… need help… Update (03/03/2018) here I am uploading a battery percentage picture of my iphone....
Chosen Solution why is my touchscreen not working? Joe Schmitt could be a software issue. Check and reinstall your drivers. I would check with Dell on here to see if there are any updated drivers that may be needed. You can get the service manual from here or use Dell Inspiron 13-5378 Display Assembly Replacement in case you will have to change your display due to a bad digitizer.
Chosen Solution My laptop’s hinge is broken when I am turning it in 360-degree angle and it made a cracking sound from then and due to that the locks that hold my screen and the back of the screen are also being separated, also one of those locks is broken due to that and can’t hold it, so what do I need to fix this? Amaan khan we would need to see the damage....
Chosen Solution why does my device shut itself down immediately, even though the battery is new Panasonic Camcorder SDR-H100, LCD monitor will turn the power On only when partially open (about 30 degrees) past that to 90 degrees, power go Off; then I have to close the LCD monitor, disconnect the battery and re-install, then open the LCD monitor partially (30 deg.) to turn the power On, and if I open all the way to 90 deg....
Chosen Solution 1 2 3 4 5 6 7 Replacement Cable It may be virtually impossible to repair the USB if damaged. I hope these pics help. If you have any thoughts, please share. Can you post the pics? I’ve heard problem with some cables, but many new cables have chipsets, so not sure if design of cable is flawed. Can you put pics please ? Regards Where can i get that cable....
Chosen Solution after replacing the lcd+digitizer on my iphone 6. i wasnt expecting the display not to work figured it was defected so i got another and still the display is not working. what could be causing this Right when you opened the phone, did you disconnect the battery first and protect yourself by wearing an ESD band? Have you also tried to put the original screen back on?
Chosen Solution I replaced my battery for my phone today and was dismayed to find it will not turn on past the apple logo on the display. I’ve tried restoring it with my computer but I’ve had no luck. Anyone know what I might have done wrong? When it is stuck on apple logo is this while plugged into a charger or not plugged into a charger? Have you tried the old battery if it still works?...
Chosen Solution Does hover 1 pioneer scooter get the battery regenerate by using brake because when I go to 15 mph, then release the throttle. I noticed that my battery on my lcd display was 3 bar and when I brake slowly, the battery bar when 4 bar. Is there something wrong with my scooter or they made regenerative from the motor to battery? When you brake it does not go on changing, your battery might old, so it shows wrong information on display....
Chosen Solution I ordered a charging port replacement for a S5 and the part model on the board itself says SM-G900W and I got a SM-G900T. I installed the part and the charging port works now but the microphone doesn’t during calls (except on speakerphone, which uses the secondary microphone). I am not sure what the issue may be as the only difference between the parts seems to be the last letter....
Chosen Solution I have a GE Profile microwave that is about 8-1/2 years old. The door latch is not opening the door consistently when I press it. I now have to press it and then with my other hand pull on the top of the door to pull open the door. The microwave is set flush into the kitchen island. Not sure what part(s) I need to order before calling repairman....
Chosen Solution recently acquired from ebay - Have WB 1TB drives in each bay. After installing the dashboard and validing software is at the current version. Turned on drobo lights came on but after the self test the 1st bay indicator light came on solid red. Swapped out drives in bays same issue on all drives. I can send alert emails back and forth checkd firewalls and antivirus on laptop and on my asus router that it is attached to....
Chosen Solution Hi. My Iphone 5C fell from a chair onto carpet. It did not crack. It turned off immidiately and became really hot at the back. I left it to cool down. After a few hours the heat went away. I tried to charge it since but it has not come back on. I tunes does not recognise the device. I have repaced batteries, screens, cameras, and other parts in other Iphones so have tried to check if anything inside is obviously broken but can’t see anything which is loose or dislodged....
Chosen Solution So my controller is not charging no matter how many cables I try. So I decided to test the battery and see it that was it so I swap the batteries in my two controllers and not neither one will charger so I’m thinking it may be both the battery and charging port on the first controller because when I but the batteries back in the proper controller I get the second to charge....
Chosen Solution when turning on the camera with memory card inserted, i got this message “card’s write protect switch is set to lock” although the card is not lock, tried different card and samething. when i took the card out, it reconized there’s no card and reinsert again, the message come out. cant take no with push on the shutter button Hi! Can you make sure that your card is indeed not write protected?...
Chosen Solution Recently I upgraded my iMac, so I replaced the thermal paste and the hd, and I put a nvme m2 in. Now my fan runs at 2000 rpm, earlier it ran at 1200 rpm. I didn’t put any thermal sensor onto the hd. My iMac is a iMac14,2, so 27” late 2013. Do I really need the sensor as Macs fan control sees the hd’s one? If you replaced the original hard drive with a standard spinning disk drive, you need the OWC In-line Digital Thermal Sensor for Hard Drive Upgrade for 27" iMacs 2012 and Later https://eshop....
Chosen Solution So I am trying to fix a badly damaged iphone 8 plus. I have unfortunately broke the flex cable of the home button and purchased an oem part knowing that the Touch ID function would not work. However, after a restore, the phone boots up to the screen “Press Home to Start” which I am unable to do. So I would restart the phone by unplugging the battery and power on to find out that the phone is stuck on the apple logo and after 20-30 seconds it would bootloop....
